Features:
Wide voltage of DC 9V – DC 90V
Support LTE CAT M1/NB1, GSM network
Water resistance IP66 compliant
BLE 5.0 is optional
Multi-interfaces can be used for remote cut-off oil/fuel, ID Identification, fuel level monitor, SOS etc.
Internal 3-axis accelerometer for driver behavior detection, motion detection
Internal GSM antenna
Internal GNSS antenna
Communication Specifications:
LTE Specifications:
Operating Band : Cat M1/NB1:LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28
LTE-TDD: B39(for Cat.M1only)
GSM Specifications:
Frequency: 850/900/1800/1900 MHZ
GNSS Specifications:
GNSS Type: u-blox GNSS receiver
Positioning mode: support GPS/GLONASS/LBS
Positioning accurancy: 2.5m
Speed accurancy: 0.05m/s
Sensitivity:
tracking: -167 dBm
Cold start:< -148 dBm
TTFF(Open Sky):
Cold start: <=34S
Hot start: <1s
Interfaces:
I/Os : B+, ACC, Relay, SOS+, 1 WIRE, MIC+, RS232, Speaker, 1 Wire0(ibutton), Speaker
GSM/GPS Antenna: Internal only
LED Indicators: GSM, GPS
General Specifications:
Dimensions : 109mm(L) x 60mm(W) x 18mm(H)
Weight : 85g
Backup Battery : Li-Polymer 270~400Mah/3.7V (270Mah in default)
Operating Voltage: DC 9V ~90V
Water Resistance: IP66 compliant
Operating Temperature: -20℃～＋80℃
-40℃～＋85℃ for storage
Air Interface Protocol:
Transmit Protocol: TCP, UDP, SMS
Scheduled Report: Report position and status based on regular time intervals and distance
Motion Report: Report when the device moves or stops
Bluetooth function: support Bluetooth 5.0 (optional)
Low Power Alarm : Alarm when battery is low
Special function: support remote cut off oil/power and ibutton Identification, SOS based on digital inputs.
Remote Control : Upgrade Remotely update through the air
